Categories
All Project Categories Partitioning Projects Uncategorized

Take Down and Rebuild Partitions in Bracknell

Client: EB Mind Bracknell
Value: £1.8k

Take down and rebuild is a common activity with demountable partitioning. The existing office space was very small and as well as re-positioning a door, we had to build a new office in the opposite corner to match the existing design and colour scheme. The first task was to draw what they had, so measure everything, take lots of photographs, look at what the wanted to do, and then work out how many bits we create by talking the walls down, and then work out how many new parts we need in order to create the new. The system used in this project is a 50mm wide demountable partition system, offering a good value product which visually can still look good. In this case the partitions had to match the existing, but all of the frames and solid panels can be made from a wide range of colours and finishes.

This project is exactly a take down and rebuild project, but with a bit more added. Although this sounds complicated, it is exactly what demountable partitioning is designed to be, you do need not destroy the partition when you take it down, as you can re-use most of the parts. The only provision is that the re-built demountable partition needs to be in the same area with the same ceiling height.

Completed Photographs

Why Demountable Partitions?

  1. Demountable partitions are tax efficient in that they are seen as movable items and so can be treated differently in writing down allowances in the accounts. Please click this link for a bit more information we have written in a blog.
  2. We can also lease Demountable Partitions as they are movable, this spreads the costs of having the work done as Demountable Partitions always cost more than customers think.
  3. Leasing of demountable partitions is very tax efficient and Cre8tive can provide illustrations, please contact us for further information.
  4. Most landlords insist on demountable partitions being used for offices as it is much easier to take them out should the tenant renting the space leave for any reason. The benefit is that is saves making a huge amount of mess and destruction that would be need with a conventional stud and plasterboard constructed wall.
Categories
All Project Categories Partitioning

Demountable Office Partition in Chippenham

Client: Mango Solutions
Value: £3.5k

Mango Solutions contacted us to build a new demountable office partition to be built onto the existing system which we installed originally many years ago. One of the offices needed to act as a server room and so had to be 30 minute fire rated, the other room had to be a small meeting room with two glazed front panels, with integral blinds. The demountable office partition system also had to match the existing system that we constructed a few months ago for another area of the office.

The difficultly with this project was the the ceiling is sloped and the door had to be constructed at a 45 degree angle making the ceiling joint difficult to construct. The system used was a 75mm wide demountable partition system offering good sound performance.

Why Demountable Partitions?

  1. Demountable partitions are tax efficient in that they are seen as movable items and so can be treated differently in writing down allowances in the accounts.
  2. We can also lease Demountable Partitions as they are movable, this spreads the costs of having the work done as Demountable Partitions always cost more than customers think.
  3. Leasing of demountable partitions is very tax efficient and Cre8tive can provide illustrations, please contact us for further information.
  4. Most landlords insist on demountable partitions being used for offices as it is much easier to take them out should the tenant renting the space leave for any reason. The benefit is that is saves making a huge amount of mess and destruction that would be need with a conventional stud and plasterboard constructed wall.
Categories
All Project Categories Partitioning Projects

75mm Wide Demountable Partitioning

Client: Call Options Chippenham
Value: £8.9k

This Demountable Partitioning project in Chippenham was very straightforward. We had to match the partitions elsewhere in the office that we built previously and match the doors. The customer wanted as much glass as possible in the offices but also wanted privacy, as well as some solid elements to fit cupboards against. The two offices needed a good sound insulating walls between the offices.

Construction Photographs

It is possible to have quite a few different configurations to the partitions in terms of solid walls, glass walls and door modules. The glazing can be single or double glazed and in this case double glazed was chosen as you get better sound insulation, and you can have integral blinds inside the glass which can be turned via a control knob to open and close, so letting in light through into the rest of the office or having a bit of privacy inside the office. We use a proprietary system manufactured by Komfort, who are one of the largest manufacturers of aluminium demountable partitions systems in the UK.

The glass height and width you can also vary, in this case we have tried to maximize the glass height, and have added a side window of glass for the smaller office as well.

Why Demountable Partitioning?

  1. They look much better than conventional stud and plasterboard partitions. Glass can be introduced greatly improving the way light gets into an office space.
  2. Using demountable partitioning is tax efficient in that they are seen as movable items. They can be treated differently in writing down allowances in accounts. Please click this link for more information.
  3. We can also lease Demountable Partitioning as they are movable, this spreads the costs of having the work done as Demountable Partitions always cost more than customers think.
  4. Leasing of demountable partitioning is very tax efficient and Cre8tive can provide illustrations, please contact us for further information.
  5. Most landlords insist on demountable partitions being used for offices as it is much easier to take them out should the tenant renting the space leave for any reason. The benefit is that is saves making a huge amount of mess and destruction that would be need with a conventional stud and plasterboard constructed wall.

Questions on Demountable Partitioning?

If you are not sure about anything we love to talk about projects and sort out problems and issues with space, please give us a call on 01380 738844

Categories
All Project Categories Partitioning Projects

50mm Wide Demountable Partitioning

Client: Pegasus Waste Management
Value: £5.5k

Demountable Partitioning

The product chosen was a 50mm demountable partitioning system manufactured by Komfort systems, with cherry veneered doors and three vision panels cut into each door. The 50mm wide demountable partitioning system offers good value for the performance versus price. The important thing for this customer was that a visual separator was needed from the Sales office and another located at the other end of the office. The building had cherry veneered doors elsewhere so it made sense to try and match them.

The plasterboard panels were decorated in a neutral colour commercial wall covering to match the rest of the building. The vinyl wall covering is tougher than a painted panel and the vinyl can be wiped clean so it is very durable. There are many different shades, colours and patterns and a wide choice of costs as well, and choice really depends on how brave you are in chosen the right design. Most people just chose the basic colours and put the colour in the furniture screens, carpets and chairs.

The difficulty with this project was that the partitions had to be cut around the beams that were strung across the office space.  The glazed fronts to the offices therefore had to be door head height so that the plasterboard above the windows could be cut out. The building also had a floor that was uneven, the important factor being that visually the glazed panels looked straight and so the line was put in with a laser. The window had a film design which at the current time of entering this project on the website had not been fitted.

Drawing work

In this case we needed to work out exactly the materials were needed first in order to cost it, but secondly to check with the customer what they wanted. This meant we had to produce a drawing. Sometimes we do not show this to the client, just in case they take all of our work and give it to someone else to price which some customers do. There is no appreciation that sometimes it can be actually quite difficult to work things out and they do not put a value on this, and we do not charge for smaller drawing work. There is a subtle difference between drawing work, space planning and visuals, we have a separate page if you want to find out more by clicking this link.

Completed photographs.

We ensured that the customer was aware that with a 50mm wide system there are compromises on the sound performance of the system. In fact, the enclosed area worked out well for them. The other side of the glass was a main walkway, the desks inside the rooms were not right up against the glass so noise transference was quite small. Our main concern was matching the positions of the vision panels on the doors. In the end the doors matched fine and the customer was pleased with the final result.

Why Demountable Partitions?

  1. They look much better than conventional stud and plasterboard partitions. Glass can be introduced greatly improving the way light gets into an office space.
  2. Using demountable partitioning is tax efficient in that they are seen as movable items. They can be treated differently in writing down allowances in the accounts. Please click on this link for a bit more information.
  3. We can also lease Demountable Partitions as they are movable. This spreads the costs of having the work done as Demountable Partitions always cost more than customers think.
  4. Leasing of demountable partitions is very tax efficient and Cre8tive can provide illustrations, please contact us for further information.
  5. Most landlords insist on demountable partitions being used for offices. It is much easier to take them out should the tenant renting the space leave for any reason. Another benefit is that it saves making a huge amount of mess and destruction that would be need with a conventional stud and plasterboard constructed wall.

Questions on Demountable Partitions or on how to reconfigure your office space?

If you are not sure about anything we love to talk about projects and sort out problems and issues with space, please give us a call on 01380 738844

Categories
All Project Categories Partitioning

Timber Demountable Partitioning in Swindon

Client: Prospect Hospice
Value: £4.5k

Demountable Partitioning.

This project included the installation of a new Timber Demountable Partitioning System in order to create private meeting space while giving a clean professional look to the existing corridor. The project was fairly unusual in that the partition system although demountable; is actually made from Timber. the basic framework is still metal stud and plasterboard and the timber trims are fitted around the walls, as well as full timber door frames used to match in with the rest of the product.

Categories
All Project Categories Partitioning Suspended Ceilings

Building Regulation Performing Fire rated Partitions

Client: Webbs Motor Caravans
Value: 28k

Fire Rated Partitions

The difficulty with this project was that the client required offices above a mezzanine floor which means that the partitions below have to be fire rated, normally this means the glass has to be georgian wired. In this case we were able to use pyrocet clear glass to still give the 30 minute fire rating and yet not spoil the overall look of the offices.

The fire rated partitions system chosen was Komfort 75mm demountable partition system which allowed us to provide insulation inside the walls to give some degree of protection from the cold when the double doors to the showroom were opened to move caravans in and out. We could have used a cheap general 25mm thick partition roll which 99% of companies use as it is cheap, but in this case we used a Rockwool rw45 slab material designed to be better for insulation.

Partition Construction photos

Not shown are the suspended ceilings ceilings that we had to fit inside the offices. The one in the lower offices had to be 1 hour fire rated to give protection to the mezzanine floor. You can also see from the photographs the pink looking plasterboard on the metal columns of the mezzanine floor, this is fire protection board.

Fire rating and Building Regulations, not sure what to do?

Just give us a call or email. We understand partitioning and Building Regulations so can solve most problems. When it comes to offices it is crucial to protect people from any potential fire, the key is to make sure that the partitions give enough protection to allow people to escape. It is not acceptable to cut corners, so we always give the correct advice.

01380 73 88 44 or email: [email protected]

Categories
Air Conditioning All Project Categories Design Office Furniture Office Refurbishments Partitioning Suspended Ceilings

Completely New Design of the Existing Office Space in Bristol

Client: Smurfit Kappa
Value: £65k

Office Design and Refurbishment in Bristol

Our client wanted a complete redesign refurbishment of the existing office space. The first task was to come up with some ideas and some colour schemes, the director wanted an adventurous new scheme, so we focused upon creating a more spacious effect through introducing new concepts of Lighting, Suspended Ceiling, Partitioning, new Air Conditioning systems, Flooring and Furniture in order to create a more relaxed office environment that mixes bold contemporary colour and natural materials.

Design and Drawing work

In working out what needs to be done, we need to know what is there. A detailed drawing showing positions of electrics and the walls was produced. The new layout required a few designs, and in particular the Director wanted to have a meeting end on his new desk, so we had to design a desk and get it made particularly for him.

Colour scheme / Design

As this area was a completely separate area from the upstairs directors suite, we thought that the whole scheme could be different. The room was completely separate from the rest of the building, so when you walked in, there was a different feel which was modern, had a blend of the traditional timber partitions, along with some stripy carpet, and the middle solid carpet was a very high quality cut pile carpet which felt soft and luxurious underfoot. One of the main requirements was that the Managing Director wanted a meeting end on his desk and it was not possible to get one to fit from standard product ranges. We therefore had to get one made..

Existing space

As you can see from the photographs the whole area needed completely stripping out and replacing.

Stripping out and building photographs

I always like this phase as the office transforms, from a very dull space to something new. We do get an immense level of satisfaction in carrying out office refurbishment projects for this reason.

Final photographs

As you can see from the final photographs, Cre8tive were successful in carrying out a complete redesign and office refurbishment of the customers existing space.

Why Demountable Office Partitions?

  1. Demountable partitions are tax efficient in that they are seen as movable items and so can be treated differently in writing down allowances in the accounts, we can also lease elements of office refurbishments. Anything that can be moved.
  2. We mainly lease Demountable Partitions as they are movable, this spreads the costs of having the work done as Demountable Partitions always cost more than customers think.
  3. Leasing of movable items is very tax efficient and Cre8tive can provide illustrations, please contact us for further information.
  4. Most landlords insist on demountable partitions in an office as it is much easier to take them out should the tenant renting the space leave for any reason. The benefit is that is saves making a huge amount of mess and destruction that would be need with a conventional stud and plasterboard constructed wall.

.

Not sure what to do?

Please give us a call and we can help with any aspect of interior office fit out, along with space planning and design work.

01380 73 88 44

Categories
All Project Categories Mezzanine Floors Office Refurbishments Partitioning Suspended Ceilings

Office Expansion in Corsham for Coombe Castle

Client: Coombe Castle
Value: £48k

Office Expansion in Corsham

This project consisted of converting a storage unit in to office space in order to provide some much needed office expansion. The project would involve fire protecting a mezzanine floor as this is required by Building Regulations if you have offices above, steel work and a suspended ceiling.  Ventilation had to be put round a chiller and fire sensors had to be installed within the chiller as it could not be moved to fit the fire protected board. Office windows had to be installed to match the rest of the building.

Upstairs needed a complete office fitting, so a suspended ceiling, dry lining the outer walls, decoration of the outer walls,  some fire rated partitioning to create a fire barrier between the offices and warehouse, as well as demountable partitioning within. Full electrical work including CAT2 lighting, 3 compartment perimeter trunking, flooring and new windows were also required. As always we follow our process, so the first step is to understand what the client wants, and then to assess what they have by taking photographs, and drawing everything.

Existing Space Photographs

It is a bit difficult to see from the photos, but essentially we had several areas to deal with. Underneath the mezzanine and on top of it was the main area, but included absolutely everything we do.

Building Regulations

It is crucial to consider Building Regulations when looking at layouts for offices. In particular fire ratings and Building Regulations which is a legal requirement. This particular project needed offices to be fitted on top of a mezzanine floor and so this is why it had to comply to the law.

If you need more information about Building Regulations, we have written a few things here.

Construction and finished photographs.

Office Expansion?

If you have a problem with your existing office space and need it altering as you are running out of space then Cre8tive can help. Please give us a call on 01380 738844.

Categories
All Project Categories Partitioning

Demountable Partitions in Chippenham

Client: Bank House Financial Management
Value: £6k

Privacy and confidentiality were a requirement for the demountable partitions for Bank House. The demountable partitions also had to match an existing demountable partition system already in the building which was no problem to achieve.

The system is 100mm wide with 4 layers of plasterboard for addded sound insulation. We also had to re-route the ventilation grills to suit the layout and provide the office furniture for the offices which was supplied by Sebastien furniture for business. As you can see from the photographs the design is quiet dated now, using Satin Anodised Aluminium frames and black laminate skirting. More modern designs move away from the black colour and the frames are available powdercoated white or grey, and are in stock. White or grey is the new Satin Anodised Aluminium look.

Drawing and design work

Initial space needed work

Demountable Partitioning with Sound Performance

The solid walls also had a neutral colour wall covering applied to the plasterboard panel, but there are a wide variety of colours and patterns to choose from. If in any doubt it is safest to chose a neutral colour, and then the colour for the office can be brought out in the fabrics of the chairs and screens of the furniture.

Why Demountable Partitioning?

  1. Demountable partitions are tax efficient in that they are seen as movable items and so can be treated differently in writing down allowances in the accounts.
  2. We can also lease Demountable Partitions as they are movable, this spreads the costs of having the work done as Demountable Partitions always cost more than customers think.
  3. Leasing of demountable partitioning is very tax efficient and Cre8tive can provide illustrations, please contact us for further information.
  4. Most landlords insist on demountable partitions being used for offices as it is much easier to take them out should the tenant renting the space leave for any reason. The benefit is that is saves making a huge amount of mess and destruction that would be need with a conventional stud and plasterboard constructed wall.
Categories
All Project Categories Office Refurbishments Partitioning

Creating a New Office Space in an Industrial Unit in Trowbridge

Client: Office Evolution
Value: £13k

Office Refurbishment

This customer purchased an industrial unit that was fitted in a way that was not really suitable for them as they needed to use it for offices. The whole space needed an office refurbishment with most things needing to be done. Creating a professional atmosphere was important as the customer wanted to use the office as a showroom as well.

They also wanted a double door to the garage area so that this could act as a store and a suspended ceiling throughout, and to make the space light and airy we used Cat2 lighting throughout.The project included a small bit of stripping out, new kitchen, redecoration, electrical power and data, new demountable partitions, new suspended ceiling and lighting and a new carpet.

Office Refurbishment Construction Photographs

Why Demountable Partitions in an Office Refurbishment?

  1. Demountable partitions are tax efficient in that they are seen as movable items and so can be treated differently in writing down allowances in the accounts, we can also lease elements of office refurbishments. Anything that can be moved we can lease.
  2. We mainly lease Demountable Partitions as they are movable, this spreads the costs of having the work done as Demountable Partitions always cost more than customers think.
  3. Leasing of movable items is very tax efficient and Cre8tive can provide illustrations, please contact us for further information.
  4. Most landlords insist on demountable partitions in an office as it is much easier to take them out should the tenant renting the space leave for any reason. The benefit is that is saves making a huge amount of mess and destruction that would be need with a conventional stud and plasterboard constructed wall.

Not sure about what to do?

If you need help with anything and are not sure what to do, please give us a call for a chat and a visit. We are happy to carry out as much or as little as you require and can come up with solutions to any problems or queries you have about an office refurbishment project.
Please call 01380 73 88 44

Want to find out more about our customer?

Please click this link to go to their website..